Journal / Article
Materials
A guide to lime plaster and limewash
The oldest wall finish in the world is still our favourite. What lime is, why it breathes, and how to use it well in a contemporary home.

Leela Iyer
Materials & Sourcing Lead
·
7
min read

Hand-trowelled lime plaster in Villa Ocra, showing the soft movement of the mason's hand.
Lime is one of the oldest building materials on earth. The Romans used it, the builders of Rajasthan’s havelis used it, and the masons of Portugal still use it today. In our studio, it is the default finish for almost every wall we design. Clients often ask why we choose a material that is slower, more expensive and less predictable than modern paint. This guide is our answer.
What lime actually is
Lime is made by burning limestone in a kiln, then slaking it with water. The result is a putty that, when applied to a wall, slowly reabsorbs carbon dioxide from the air and turns back into stone. A lime wall, in a sense, is a very thin layer of limestone grown on your house.
There are two main finishes. Lime plaster is applied in thicker coats with a trowel and can be burnished to a soft sheen. Limewash is a thin, milky paint brushed on in several translucent layers. Both share the same essential qualities.

Why it breathes
Modern acrylic paint forms a plastic film over a wall. Moisture trapped behind it has nowhere to go, which is why paint blisters and peels in humid climates. Lime is vapour-permeable: it lets moisture pass through and evaporate. In the Konkan monsoon, this is not a small thing. Walls stay dry, mould struggles to grow and the finish does not fail.
Lime is also naturally alkaline, which makes it mildly antibacterial, and it contains no volatile solvents. A freshly limewashed room smells of nothing at all.
Paint sits on a wall. Lime becomes part of it.
The beauty of variation
Lime is never perfectly even. Each coat dries at a slightly different rate, and each mason’s hand leaves its own rhythm. The result is a soft, cloudy surface with depth that no flat paint can imitate. At Villa Ocra in Goa, we developed an ochre lime with a local mason, tinted with pigment matched to the red soil of the site. In morning light it looks almost pink; at dusk it turns to gold.
This variation is exactly what some clients fear at first. We always make large sample panels on site and ask clients to see them at different times of day before deciding.
Practical advice
Lime needs a compatible base. It works beautifully over brick, stone and lime-based renders, but poorly over cement or gypsum without proper preparation. It also needs time: each coat must cure before the next, and a full plaster finish can take weeks.
In kitchens and bathrooms, we use a harder tadelakt-style finish, polished with stone and sealed with natural soap, so that it resists water splashes. Everywhere else we leave lime unsealed so that it can keep breathing.
Maintenance is gentle. Small marks can often be rubbed away; larger ones can be patched with a fresh coat that blends in within weeks. A lime wall rarely needs complete repainting, and when it does, it simply takes another layer.
A slow material for slow homes
Lime asks for patience from everyone involved: the mason, the client and the studio. In return it gives a surface that improves with age, a healthier home and walls with a quiet life of their own. We cannot imagine working without it.
Where to start
If you want to try lime in your own home, begin with a single room, ideally one with good natural light and walls that are already brick or lime-rendered. Ask to see a real lime wall that the mason has finished before, not just a photograph. Agree on the level of variation you are comfortable with, and make a sample at least a metre square.
Expect it to look patchy while it cures. Lime dries unevenly and can take several weeks to settle into its final tone. Resist the urge to judge too early. The day it finally evens out, and the wall begins to glow softly in the afternoon light, you will understand why builders have trusted it for thousands of years.
See lime in a finished home in Casa Salt, or read how we build colour from materials.

